ANALOG AV CONNECTIONS
USING THE FRONT VIDEO AND AUDIO INPUT JACKS TO CONNECT A VIDEO GAME OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1 | Connect game Audio Output (R/L) to the TV Audio | ||
Input (R/L). Then connect game Video Output to the | |||
| TV Video Input. |
| |
2 | Press POWER to turn on the TV, then turn on | ||
external equipment. |
| ||
3 | To access | Audio / Video | inputs, |
press the | INPUT key to | select |
Video1.
1 VIDEO GAMEWhat you will need for connections:
Audio Video Cable – 1
CAMCORDERIMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must run All Channel Search twice before you can select the AV inputs.
REMOTE CONTROL
3 2
■“No Signal” will appear randomly on the screen when no signal is detected at the VIDEO1 input jack.
■Press the INPUT key after connecting cables to access the AV inputs. There is NO need to tune to a blank channel.
Need help? Visit our Web site at www.sanyoctv.com or Call | 11 |