USING THE REMOTE CONTROL

PRECAUTIONS

To ensure safe operation, please observe the following precautions:

 

Replace both batteries at the same time. Do not use a new battery with

 

a used battery.

 

Risk of explosion, if battery is replaced by an incorrect type.

 

Do not expose the Remote Control Unit to moisture or heat.

➀

REMOTE CONTROL KEYS

➁

➀Input Key—Press to change the input signal source as follows: Analog RF ➡ Digital RF ➡ Video1 ➡ Video2

➡Component2 ➡ Analog RF.

 

 

➂

➁Number Keys—Two keys must be pressed to select

➃

a direct channel. Example: Press 0 then 6 to select

channel 6.

 

 

➄

For Analog Cable channels above 100, press and
hold the 1 key until C1– – appears, then press the

 

other two numbers.

 

 

 

➂Info Key—Press to display the Digital and Analog Full

➅

Banner information (press again to remove the

 

display).

 

 

 

Digital Full Banner display—Contains a two-part

➆

Channel Number (Major and Minor) and Tuner ID. If

 

available the following is also included: Audio Info,

 

Program Title, and V-Chip Program Rating.

 

➇

 

 

 

Tuner ID

Digital Channel

 

Major

Minor

 

➈

➉

Program Rating

Program Title

Audio Info

Analog Full Banner display—Contains the Channel Number (analog antenna/cable), Tuner ID, Station ID (if available), Program Title (if available), and V-Chip Program Rating.

Cable Channel

Program Rating

Program Title

Station ID

Points toward

TV

➠

11

12

13

14

15

16

17

18

12 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032