ANALOG A/V CONNECTIONS
USING THE ANALOG VIDEO JACKS TO CONNECT A VCR (OR OTHER ANALOG DEVICE)
Switch off DTV and external equipment before connecting cables. (Cables are not supplied.)
1 | Connect VCR’s Audio Video Out to the DTV’s Video |
In jacks. | |
| NOTE: For Mono VCR (Single Audio Jack), connect |
| VCR Audio Out to DTV Audio (L) Input. |
2 | ConnectOptional VCR’s |
| Jack. |
| NOTE: |
| jacks connection. |
3 | Press POWER to turn on the DTV, then turn on |
CONNECTING ANALOG AUDIO OUT JACKS TO A STEREO AMPLIFIER
Switch off DTV and external equipment before connecting cables. (Cables are not supplied.)
1 Connect the DTV Audio Out (R/L) to the Stereo Amplifier In (R/L).
2 Press POWER to turn on the DTV, then turn on external equipment.
NOTES:
Do not connect external speakers directly to the DTV.
When TV Speaker is in the ON mode, sound will be reproduced through your DTV and stereo amplifier.
When TV Speaker is in the OFF mode, sound will be reproduced only through the stereo amplifier. (See page 20 to set DTV speakers.)
| external equipment. |
4 | Press the INPUT to select VIDEO 1 or VIDEO 2 to |
view the VCR program. |
Back View of VCR
|
|
|
| IN |
|
|
|
| FROM ANT. |
IN |
|
|
| VHF/UHF |
VIDEO | RF |
| ||
| TO TV | |||
|
| CHANNEL | ||
OUT |
| 3 | 4 | OUT |
|
|
| ||
|
|
|
| |
VIDEO |
|
|
1 | 2 | ||
Jack |
| ||
|
| ||
COMPONENT VIDEO INPUT | VIDEO AUDIO INPUT | ||
|
|
| VIDEO 2 VIDEO 1 |
DTV AV |
| ||
INPUT Jacks ANALOG COMPO 3 COMPO 2 | AUDIO 3 | ||
AUDIO |
|
|
|
OUTPUT | Y |
|
|
|
| VIDEO | |
|
|
| |
L (MONO) | Pb |
| L AUDIO (MONO) L |
|
| ||
R | Pr |
| R |
Remote Control |
|
|
|
What you will need for connections:
Audio Cable – 1
1
Stereo Amplifier
COMPONENT VIDEO
ANALOG | COMPO 3 |
AUDIO |
|
OUTPUT | Y |
| |
L (MONO) | Pb |
R | Pr |
Back View of DTV
Remote Control
INPUT |
|
|
| |
|
| POWER |
| |
1 | 2 | 3 | 2 | |
4 | 5 | 6 | ||
| ||||
|
|
|
|
|
|
|
|
|
| NOTE: Composite | jacks | |
|
|
|
|
|
| offer only 480i (SDTV) | ||
|
|
|
|
|
| |||
|
| INPUT |
|
|
| resolution. |
| |
|
|
| POWER |
|
|
| ||
4 |
| 1 | 2 | 3 | 3 |
|
|
|
| 4 | 5 | 6 |
|
|
| ||
|
| What you will need | ||||||
|
|
|
|
| ||||
|
|
|
|
|
|
| for connections: | |
|
|
|
|
|
|
| Audio / Video Cable | – 1 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
■Press INPUT key after connecting cables to access the VIDEO 1 or VIDEO 2 input. There is NO need to tune to a blank channel.
■VIDEO 1 and VIDEO 2 jacks have identical functions. Any com- patible analog video device can be connected to either set of jacks.
■“No Signal” will appear randomly on the screen when no signal is detected at the VIDEO 1 or VIDEO 2 inputs.
■Position your DTV at least 2 feet from stereo speakers. The magnets in the speakers may affect the picture quality.
10 Need help? Visit our Web site at www.sanyoctv.com or Call