FIRST-THINGS-FIRST
This new
Digital (DTV) Antenna Connection
•Connect an RF antenna to the Digital Antenna In terminal.
The digital tuner in this DTV receives HD signals from an antenna. Digital signals from a STB are received through a STB via the Component In jacks.
This DTV can receive and display ANY resolution being broadcast (HDTV, EDTV, or SDTV).
Analog RF Antenna Connection
•Connect a Cable signal (with or without a cable box), Satellite Receiver, or RF antenna to the Analog RF input.
The analog tuner in this DTV receives Analog Antenna signals, Analog Cable signals, or the RF output from a Satellite Receiver, VCR, or cable box.
RF
Antenna
DTV Back
DIGITAL
ANTENNA IN
NOTES: If you do not have a VCR connect signal directly to DTV 75 (UHF/VHF/CATV) ohm terminal.
The only resolution available with any of these connections, regardless of the original content, is standard analog (SDTV).
Analog Cable
IN | VCR Back |
| OR |
| |||
FROM ANT. |
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
OUT TO TV |
| CATV FRANCHISE NOTE: Cable | |||||
|
| ||||||
|
| companies, like public utilities, | |||||
|
| are franchised by local govern- | |||||
TV Back |
| ment | authorities. | To receive | |||
| cable | programs, | even | with | |||
|
| equipment which is capable of | |||||
| UHF/VHF/CATV | receiving | cable | channels, | the | ||
|
| consumer | must | subscribe to | |||
|
| the cable | company’s service. |
CATV IN |
|
|
|
|
|
CH3 |
|
|
|
| RF |
CH4 |
| IN FROM |
|
| |
VIDEO L- |
|
| |||
VIDEO | L- |
|
|
| |
OUT TO TV |
| SAT. |
|
|
|
|
|
|
|
| Antenna |
Analog Satellite |
|
|
| ||
| Receiver |
|
|
| |
IN | VCR Back | OR | IN | VCR Back | |
FROM ANT. |
| FROM ANT. | |||
|
|
| |||
OUT |
|
|
| OUT |
|
OUT TO TV |
|
|
| OUT TO TV |
|
|
| TV Back |
|
| TV Back |
UHF/VHF/CATV |
|
|
| UHF/VHF/CATV |
(Continued on next page.)
■DTV will select the correct Antenna mode for the type of Analog RF signal connected automatically.
■Use “Antenna Selection” in the Setup menu to change the Antenna Mode.
■DTV will switch off automatically after 15 minutes if there is no signal reception (cable out or station not broadcasting).
■If you move the DTV to a new location, press the RESET key twice after connecting the signal and turning on the DTV.
Need help? Visit our Web site at www.sanyoctv.com or Call | 5 |