POWER SUPPLY

Batteries

1.Open the battery compartment lid.

2.Install two “AAA” batteries. Observe proper polarity.

1

2

Fig. 3

Battery indicator ( )

The line of rectangles is the battery gauge. Black rectangles show the battery condition.

: Full, good condition

or (“LOW BATT” appears.): Weak or exhausted batteries, must be replaced.

CAUTION:

Remove the batteries if the unit will not be used for a month or longer.

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DIS- POSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.

AC adaptor

Connect the AC adaptor (SANYO Model No. 3CV-120US, not supplied) to the EXT DC 3V jack. (The batteries are automatically disconnected.)

The center pin of the EXT DC 3V jack is positive (+).

4

Page 5
Image 5
Sanyo ICR-B50 instruction manual Power Supply, Batteries, Battery indicator, AC adaptor