Care and Cleaning (continued)

Air Clean Filter

The air clean filter removes dust and dirt from the air, and reduces odors and

 

smoke from tobacco.

 

This air clean filter cannot remove harmful gases or vapors nor ventilate air in

 

the room. You must open doors or windows frequently when you use gas or oil

 

heating appliances. Otherwise there is a risk of suffocation in extreme cases.

How to install the air clean

The air clean filter needs to be installed behind the air intake grille.

filter

1.

Remove the air intake grille.

 

2.

Install the air clean filter in the

 

 

position shown in the figure.

 

3.

Remount the air intake grille.

How to clean the air clean filter

NOTE

Cleaning the main unit and remote control unit

Removing and remounting the air intake grille

CAUTION

Washing the grille with water

Air clean filter

In general, the filter should be sucked to remove dust in low fan speed of a vacuum cleaner once every three months.

If there is heavily grime on the filter, soak the filter in lukewarm water with neutral detergent diluted 1:500 for 1 to 2 minutes then wash it.

Rinse the filter in clean water, then let it dry on the towel in room temperature.

Do not bend nor give excessive force onto the air clean filter.

If the filter surface is heavily blocked with dirt or damaged, replace it with new one. Purchase a replacement filter at your local dealer. (model STK-FDXB)

Wipe clean using a soft, dry cloth.

To remove stubborn dirt, moisten a cloth in warm water no hotter than 104 °F, wring thoroughly, and then wipe.

The air intake grille can be removed in order to wash it with water.

Refer to “How to remove the anti-mold filter” and “How to replace the anti-mold filter” on page 22.

When using a footstool or the like, be careful not to let it tip over.

Clean the grille gently using a soft sponge, or the like. Then wipe away any remaining moisture.

Neutral detergent may be used to remove stubborn dirt. Then rinse thoroughly with water and wipe away any remaining moisture.

Cleaning the negative ion generator

Follow the steps below when the generator has become dirty.

For safety, be sure to turn the air conditioner off and also to disconnect the power before cleaning.

Remove the dust on the negative ion generator.

Use a toothbrush, etc. to dust off the end.

Use a cotton swab, etc., to clean around the generator inside the plastic case, taking care not to touch the electrodes.

Negative ion generator (metal electrodes inside plastic case)

NOTE

During use, the negative ion generator and other metal parts may become discolored: this is normal and not indicative of malfunctioning.

If the dirt on and around the negative ion generator is left to build up, a puffing or sputtering sound will eventually be heard. In this case, clean the generator immediately.

Do not apply excessive force while performing maintenance.

OI-806-23-EG

23

 

Page 23
Image 23
Sanyo KMS1272, KMS0972 Filter, How to clean the air clean filter, Washing the grille with water Air clean filter

KMS1272, KMS0972 specifications

The Sanyo KMS0972 and KMS1272 are two prominent models from Sanyo, a brand known for its commitment to innovation and performance in the realm of electronics. These models specifically cater to the needs of consumers looking for efficient and high-quality appliances, ensuring that everyday tasks are simplified while also providing excellent functionality.

Both the KMS0972 and KMS1272 come equipped with state-of-the-art features aimed at delivering user-friendly experiences. A key hallmark of these models is their energy efficiency, which is increasingly important in today's environmentally-conscious market. By optimizing power consumption, these models not only reduce electricity bills but also contribute to a lower carbon footprint.

The KMS0972 is particularly noted for its compact design, making it a perfect fit for smaller spaces without compromising on performance. This model includes advanced temperature management technology that allows users to precisely control heat settings. It features multiple temperature presets, catering to various cooking needs, from baking to grilling. Its intuitive interface ensures that even novice cooks can achieve culinary excellence.

On the other hand, the KMS1272 presents a larger capacity, suited for families or those who frequent entertaining guests. It is designed with advanced cooking technologies that facilitate even heat distribution, which helps in achieving consistent results every time. The KMS1272 boasts a sleek digital display and touch controls, providing users with an effortless way to navigate through settings and options.

Both models are constructed with durable materials, ensuring longevity even with frequent use. Safety features are paramount in the design, including over-temperature protection and auto shut-off mechanisms. These features not only promote safety in the kitchen but also give users peace of mind while cooking.

In addition to traditional cooking methods, both the KMS0972 and KMS1272 integrate modern technologies such as smart connectivity. This allows users to connect their appliances to smartphones, enabling remote operation and monitoring. This progression towards smart technology accentuates the convenience factor, allowing users to multitask effectively.

In summary, the Sanyo KMS0972 and KMS1272 stand out as exceptional choices for consumers seeking advanced features, energy efficiency, and convenience. With their innovative technologies and user-friendly characteristics, these models are designed to meet diverse cooking needs, making them a valuable addition to any kitchen.