PC INPUT
Use your HDTV as a computer monitor by hooking up your PC or Laptop to the TV with the use of an appropriate monitor cable (not included.)
Before connecting any cables, disconnect the AC power cords of both the HDTV and PC from the AC outlets.
Power on the HDTV and any other peripheral equipment before powering on the computer.
To avoid an “Out of Range” condition please set your PC’s output resolution to one compatible with your HDTV. See PC Resolution chart on page 3.
NOTE: If computer has only DVI Output, a DVI to RGB adapter will be required , or, a DVI to HDMI cable and RCA audio cables (see HDMI (DVI) INPUT1 on page 7.)
RGB OUTPUT | DVI OUTPUT |
JACK | JACK |
PC Setting
Auto Adjustment – Automatically adjusts display position, dot clock and phase.
Dot C lock – Adjust the Dot frequ ency t o match your computer’s Dot frequency.
Phase – Adjust this paramete r wh en the picture appears to flicker or is blurred.
Power Saving – Enable the HDTV to tu rn to Standby Mode when computer is not in use.
HDTV SIDE PANEL
Stereo mini audio cable
RGB Monitor
cable
PC OR LAPTOP
SANYO recommends using a monitor cable that includes a Ferrite Core.
PC SETTING SCREEN
PC Picture and Sound
Standard – Sets predetermined valu es to the Picture or Sound parameters.
Manual – Adjust Contrast, Brightness, and Color Temperature screen set tings, and the Bass and Treble audio settings.
Laptop Display
When usi ng yo ur SANYO HDTV to d isplay a Laptop’s screen display, holding down the Fn (or FN) key while pressing th e ap propriate fu nction key (F5, F7, F8, etc) should cycle through different display modes between the laptop and the HDTV.
Modes may include displaying only on the laptop screen, on b oth t he lapto p a nd the H DTV, o r displaying only on the HDTV.
Hold down 
and press 
NOTE: Fn key and function key symbols on the laptop’s keyboard may vary from one brand to another.
PC PICTURE AND SOUND SCREENS
NOTE: These settings do not affect normal TV viewing.
18 | Need help? | http://ca.sanyo.com |
