Sanyo LNS-S03 manual Fig-6

6	Use a Light-Block Sheet (provided with projector) corresponding with lens. (Refer to the Type No.
	below.) Set Light-Block Sheet through the lens.

Make sure the shape of Light-Block Sheet and be sure to set them as shown in the Fig. 6.

NOTE:

●Be sure to set a Light-Block Sheet as shown in Fig-6.

●Make sure the mark (TOP and BACK) on Light-Block Sheet and set them properly.

Use light-block sheet Type No. TYPE FD1 (PART No. 610 290 9258)

Fig-6

LIGHT BLOCK SHEET

Make sure the sheet figure and put

on proper position.

-4-