LCD PROJECTOR LENS
MODEL NO.
LENS REPLACEMENT AND
INSTALLATION PROCEDURE
NOTES ON LENS INSTALLATION
Lens installation should be performed by the qualified service personnel. It should be followed by this procedure precisely.
Before attempt to install the lens, confirm the model number (both the LCD projector and the lens) and use the proper lens.
If you have any questions, contact to the dealers.
PARTS LIST
Following parts are contained in the packing.
· LENS | 1 piece |
· LENS MOUNTING SCREWS | 6 screws (2 for spare) |
· DRIVER | 1 piece |
· | 1 sheet |
· LENS COVER (UPPER · LOWER )1 set
Following checks and confirmations should be taken for safety.
Check the following things by the time of the cabinet assembly after the lens installation.
1.Confirm the lens is securely fixed by 4 screws.
2.Wiring must not be tangled in the gear of the lens motor or the other mechanical part.
3.There is no missing part, or no loosing mounting part.
