Sanyo LNS-T02K, LNS-W02K manual Fig-6, Fig-7, Fig-8

4 INSTALL THE LIGHT-BLOCK SHEET. (See figure-6)

Install the light-block sheet around the lens as shown in the illustration.

(Use the sheet included with the lens.)

5 MOUNT THE LENS COVER. (See figure-7)

LIGHT-BLOCK SHEET

Fig-6

When in install the both upper and lower lens	UPPER LENS COVER
covers, put the light-block sheet through the	A
lens and install the sheet so that it should be
placed in the guide slot of the lens cover. (See
figure-8) If the installation of the light-block
sheet is incorrect, there will be the space
between lens and the lens cover, so that it will
be the cause of leakage of light or the dust
entering at the main cabinet.

1.Insert the upper part lens cover and fix them with screws A (4 screws).

2.Insert the lower part lens cover and fix them with screws B (2 screws).

A

B

LOWER LENS COVER

Fig-7

❇Removed lens cover in figure-2 is not used, keep the cover for possible re- use when current lens is used.

Insert into the slot.

Set the light-block sheet, so that the large rounder side is set over the lens.

LIGHT-BLOCK SHEET

Fig-8