NOTES ON LENS INSTALLATION
•Lens installation and replacement should be made by the qualified service per- sonnel.
•Be sure to install the lens following this procedure precisely.
•Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents.
•The lens cover is attached to the lens for protection. Be sure to remove the lens cover from the lens before installation.
•When installing or replacing the lens, be careful not to stain, scratch or damage its surface.
•When moving or setting up the projector, be sure to replace the Lens Cover to protect the surface. Be careful not to hold the lens. It may damage the lens, cabi- net, or mechanical parts.
LIST OF CONTENTS
Following parts are included in the package.
• | LENS | 1 pc |
• | DRIVER | 1 pc |
BE SURE TO CHECK THE FOLLOWING MATTERS FOR SAFETY
After installing or replacing the lens, be sure to confirm the followings for safety.
1.Make sure the lens attachment is fixed on the lens by 4 screws.
2.Make sure the lens is fixed on the projector by lens lock lever.
3.Make sure no part is missing, or loose.
Not all the parts included may be used for lens installation or replacement. Keep these parts for later use.
Note : Illustrations in this manual may differ from the actual product.
