Release Lens Lock (Clockwise)
Pinch the tab and turn the lever clockwise to unlock the lens.
Fig-6
Fix Lens Lock (Anticlockwise)
Pinch the tab and turn the lever anti- clockwise to lock the lens.
Fig-7
CAUTION:
Turn the Lens Lock Lever anticlockwise until the lens is locked. Make sure the lens is securely installed after installation.
FOCUS ADJUSTMENT (For Model LNS-W07)
Set up the projector and project image on the screen.
1.Loosen the Focus Lock Screw on the projection lens.
2.Rotate the projection lens to obtain proper focus on center area of the screen.
3.Lock the Focus Lock Screw securely.
When proper focus is not observed at outer area of the screen, proceed following adjustments.
4.Loosen the Focus Lock Ring on the projection lens. (Turn the Lock Ring
5.Rotate the lens to obtain proper focus on outer area of the screen.
6.Lock the Focus Lock Ring securely. (Turn the Lock Ring to clockwise.)
If proper focus is not observed over the entire screen, repeat above adjustments 1~ 6.
