Specifications
Model No. |
|
| ||||||
Temperature Range |
|
| ||||||
Exterior Dimensions | 1,400 x 800 x 945 | 2,570 x 770 x 1,070 | 2,010 x 770 x 1,070 |
| 1,860 x 800 x 945 | 750 x 700 x 945 | ||
[W x D x H] mm (inch) | (55.1 x 31.5 x 37.2) | (101.2 x 30.3 x 42.1) | (79.1 x 30.3 x 42.1) |
| (73.2 x 31.5 x 37.2) | (29.5 x 27.6 x 37.2) | ||
Interior Dimensions | 500 x 450 x 572 | 1,840 x 500 x 762 | 1,280 x 500 x 762 |
| 1,120 x 520 x 530 | 480 x 430 x 420 | ||
[W x D x H] mm (inch) | (19.7 x 17.7 x 22.5) | (72.4 x 19.7 x 30.0) | (50.4 x 19.7 x 30.0) |
| (44.1 x 20.5 x 20.9) | (18.9 x 16.9 x 16.5) | ||
Effective Capacity | 128 liters (4.5 cu.ft.) | 701 liters (24.8 cu.ft.) | 487 liters (17.1 cu.ft.) |
| 309 liters (10.9 cu.ft.) | 86 liters (3.0 cu.ft.) | ||
Exterior Cabinet |
| Galvanised steel with baked on finish |
|
| ||||
Interior Cabinet | Aluminum plate |
| Stainless steel |
| ||||
Inner Lid |
| 1 | 4 | 3 |
| 1 | ||
Insulation |
|
|
|
| ||||
Compressor | High stage side |
| Hermetic type, 1,100 W |
|
| Hermetic type, 450 W | Hermetic reciprocated type, | |
Low stage side |
| Hermetic type, 1,100 W |
|
| Hermetic type, 750 W | 450 W | ||
|
|
|
| |||||
Evaporator | High stage side |
| Cascade condenser |
| ||||
Low stage side |
| Tube on sheet (shared with interior) |
| |||||
|
|
|
| |||||
Condenser | High stage side | Fin and tube type |
| Fin and tube type |
| Finless tube type | ||
Low stage side | Cascade condenser | Shell and tube type | Cascade condenser | |||||
|
| |||||||
Temperature Control | Microprocessor |
| Microprocessor: Keypad input |
| ||||
control system, |
| Temp. input range: |
| |||||
|
|
| Set value memory: |
| ||||
Temperature Display |
|
| Digital display |
|
| |||
Sensor |
|
| Platinum resistance (Pt. 1000 Ω) |
| Platinum resistance (Pt. 100 Ω) | |||
Safety |
| Cylinder key on the lid handle and Mouse proof cover on the back side |
| |||||
|
| Selectable high temp. alarm (+10˚C & +15˚C from set point) |
| Adjustable high and low temp. alarm | ||||
Alarm system |
|
| (±5˚C to ±20˚C from set point) | |||||
|
|
|
|
| ||||
|
| Power failure alarm, Filter check lamp (Except | ||||||
Net Weight (Approx.) | 265kg (584 lbs.) | 335kg (739 lbs.) | 291kg (642 lbs.) |
| 219kg (483 lbs.) | 103kg (227 lbs.) | ||
272kg (600 lbs.) | 345kg (761 lbs.) | 301kg (664 lbs.) |
| 109kg (240 lbs.) | ||||
|
|
|
| |||||
|
|
|
|
|
|
|
|
ATN: LN2 backup system, temperature recorder
AT: LCO2 backup system, temperature recorder
Optional Accessories
Storage Racks (Aluminium)
Model No. | ||||
Case Dimensions | 207 x 144 x 413mm | 155 x 155 x 515mm | 207 x 144 x 539mm | 207 x 144 x 665mm |
(W x D x H) | 8.1” x 5.7” x 16.3” | 6.1” x 6.1” x 20.3” | 8.1” x 5.7” x 21.2” | 8.1” x 5.7” x 26.2” |
Number of Drawers | 3 | 4 | 4 | 5 |
Applicable Model | ||||
(Rack capacity) | ||||
|
|
|
|
|
Inventory Racks (Stainless steel)
Model No. | Box Type | External Dimensions (mm) | Freezer Model (Rack capacity) |
|
| ||||
(Capacity) | Width | Depth | Height |
|
| ||||
|
|
|
|
|
|
|
|
| |
2” (7) | 144 | 142 | 405 |
|
|
| |||
|
|
|
|
|
|
|
|
| |
2” (9) | 144 | 142 | 518 | (9) |
|
| |||
|
|
|
|
|
|
|
|
| |
2” (13) | 144 | 142 | 592 | (24), 794 (36) |
|
| |||
|
|
|
|
|
|
|
|
|
|
3” (5) | 144 | 142 | 405 | (6) |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
3” (6) | 144 | 142 | 518 | (21), 1156 | (9) |
|
| ||
|
|
|
|
|
|
|
|
| |
3” (9) | 144 | 142 | 747 | (24), 794 (36) | |||||
|
|
|
|
|
|
|
|
Temperature Recorder
Model No. | |||
Recording | |||
Range | |||
|
| ||
Freezer |
| ||
Model | |||
| |||
|
| ||
|
|
LCO2 Backup Kit for
LN2 Backup Kit for
for
(I) version for North America only
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load). In order to use the freezer at a stable temperature for a long time, it is recommended that the temperature be set to at least 5°C higher than the indicated lowest temperature.
In addition, depending on the usage conditions, it may not be possible to reach the indicated lowest temperature.
Caution:
SANYO guarantees the product under certain warranty conditions.
SANYO in no way shall be responsible for any loss of content or damage to content.
• Appearance and specifications are subject to change without notice.
SANYO Electric Co., Ltd., Biomedical Division, Gunma is certified for:
Quality management system: ISO9001 / Medical devices quality management system: ISO13485 / Environmental management system: ISO14001
RoHS (European Restriction of Hazardous Substances directives) compliant
Distributed by:
SANYO Electric Co., Ltd.
Biomedical Division
http://www.sanyo.co.jp/cmg/biomedical©2008 SANYO Printed in Japan 2008.12 MA