Sanyo MPX-MD4, MPX-CD4 Setting the ACTIVE REC Mode, SETTING THE SENSOR POSITION AND SENSITIVITY LEVEL, SENSOR SET menu, Menu, DURATION, ACTIVE REC, (SENSOR SET)

Press the l button to highlight the setting to modify.

SENSOR SETTING

Menu 5

You can set an area of the screen to be used as a sensor. You can also set the recording mode (ACTIVE REC) for sensor recording, when the sensor sends a trigger as it detects a movement.

(SENSOR SET)

Setting the ACTIVE REC Mode

1 Press the MENU button 5 times to display the (SENSOR SET) menu.

3 Using the + (or –) button, select the desired setting, then press the l button.

•Repeat step 3, until all the settings are as desired.

4 ☞Press the NEXT button to go to the POSITION/LEVEL

SET sub-menu,

☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

(SENSOR SET)		(SENSOR SET)
ACTIVE REC		ACTIVE REC		MODE2
	MODE2
DURATION	05 S	DURATION		05 S
POSITION/LEVEL SET		POSITION/LEVEL SET
PRESS NEXT		PRESS NEXT
LIVE		QUAD	LIVE

SETTING THE SENSOR POSITION AND SENSITIVITY LEVEL

Example: To adjust the camera 2 sensor position and sensitivity level to 3

1 From the (SENSOR SET) menu, press the NEXT button twice to go to the sub-menu for camera 2.

•The sub-menu for each camera is selected by pressing the NEXT button.

•The camera live picture is displayed, and the sensor position and sensitivity can be adjusted for that camera.

2 Using the l (or c) button move the sensor frame down (or right) to the desired sensor area position.

•Press and hold the SHIFT button, then press the l button to move the sensor frame up.

•Press and hold the SHIFT button, then press the c button to move the sensor frame to the left.

•Press and hold the SHIFT button, the press the + (or –) button to adjust the bright of sensor frame.

3 Press the + (or –) button to raise (or lower) the sensor sensitivity level (03).

NOTE: The displayed frame will flash if there is movement within the sensor area during the setting.

The available sensitivity levels are:

OFF (not used), 1, 2,.....10 (10 being the most sensitive)

SENSOR SET menu

ACTIVE REC

MODE1: The live pictures from the camera corresponding to the alarm trigger only are recorded.

MODE2: The live pictures from the camera corresponding to the alarm trigger are recorded together with the pictures from the other cameras. (Default setting)

NOTE:

For further details, please refer to the example on the next page.

4 ☞Press the EXIT button to return to the menu display,

☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

	1	Sensor frame
	(SENSOR SET)
	ACTIVE REC	MODE2
	DURATION	05 S
ZOOM	POSITION/LEVEL SET
	PRESS NEXT	CAM2 OFF
		CAM2 OFF

DURATION	2	3
The recording duration can be set to:	2	3
The recording duration can be set to:
01, 02, 03, 04, 05 (Default setting), 10, 30 seconds
	MON2 LIVE	QUAD
	CAM2 OFF	CAM2 03
	SHIFT
		Sensitivity Level

English