Press the l button to highlight the setting to modify.
Press the l button to highlight the setting to modify.

VCR SIGNAL INPUT/OUTPUT AND COMPUTER CONTROL SETTING

Menu 8

(VIDEO LOSS SET)

 

(RS232C SET)

 

 

 

When the live picture signal feed is interrupted, you can set the action taken, and if the video loss is recorded as alarm data. First set “VIDEO LOSS” to “ON”, then make the “DATA” and “DISPLAY” settings as desired.

Setting the Video Loss Mode

1

2 Using the + (or –) button, select the desired setting, then press the l button.

Following this procedure, select the settings for DATA and

DISPLAY.

3 ☞Press the l button to go to the next menu,

☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

REC SPEED

 

002 H

ALARM REC SPEED 002 H

1,COLOR2

KILLER

 

0FF

(VIDEO LOSS SET)

VIDEO LOSS

 

ON

 

DATA

 

 

 

 

ON

 

DISPLAY

FREEZE

 

(RS232C SET)

DATA SPEED

19200

 

LIVE

QUAD

 

 

 

 

 

 

 

VIDEO LOSS SET menu

VIDEO LOSS

You can set the action to take when there is an interruption in the video signal feed.

ON: When there is video loss, the image just previous to the interruption is frozen on-screen or color bars are displayed (see “DISPLAY” below) and “VIDEO LOSS” is displayed on-screen. (Default setting)

OFF: When there is video loss, “NO VIDEO” is displayed on-screen.

DATA

You can set the data (date, time, etc) of the video losses to be recorded as alarm data. (To view the recorded data, refer to “ALARM DATA DISPLAY” on page 33.)

ON: The video losses data is recorded as alarm data. (Default setting)

OFF: The video losses data is not recorded.

DISPLAY

You can set the display mode when there is an interruption in the video signal feed.

FREEZE: When there is video loss, the image just previous to the interruption is frozen on-screen. (Default setting)

TEST: When there is video loss, color bars are displayed on-screen.

Connect the multiplexer to a computer, using a 9-pin D-SUB cable (sold separately), then set the maximum communication speed between the unit and the computer.

For detailed information, refer to “RS232C CONTROL” on page 35.

Changing the Setting

1

2 Using the + (or –) button, select the desired setting. The available speeds are:

2400, 4800, 9600, 19200 (Default setting) bps

3 ☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

VIDEO LOSS

 

ON

 

DATA

 

ON

 

1,DISPLAY2

FREEZE

 

(RS232C SET)

 

DATA SPEED

 

19200

 

LIVE

QUAD

 

 

 

 

 

 

32

English