Setting (Computer / Video Mode)
Menu Position
Choose the menu location on the display screen.
Mounting
The factory default setting.
Front-Ceiling
When you select this function, the projector turns the image upside down for ceiling- mounted projection.
Rear-Desktop
When you select this function, the projector reverses the image so you can project behind a translucent screen.
Rear-Ceiling
When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection.
ECO Mode
Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life.
Input Search
Use to automatically search input signal.
Highland
Turn on Highland mode operates the fans at full speed continuously to allow for proper high altitude cooling of the projector.
Logo
Choose to display the logo or not.
Lamp Counter
Displays Hour the lamp’s elapsed operating time (in hours).
Lamp Counter Reset
Press X to enter its
Keystone
Adjusts image distortion caused by tilting the projector.
OSD Transparency
Use to adjust OSD’s transparency.
OSD Timeout
Duration OSD menu stays active (at idle state by second).
