Sanyo PLC-SU07N CONNECTING TO THE IBM-COMPATIBLECOMPUTER

CONNECTING THE PROJECTOR

CONNECTING TO THE IBM-COMPATIBLE COMPUTER

To connect with the IBM-compatible computer, refer to the figure below.

Use Cables and Adapter indicated below.

·VGA CABLE (supplied)

·CONTROL CABLE FOR PS/2 PORT or SERIAL PORT (supplied)

·MONITOR CABLE (not supplied)

·AUDIO CABLE (stereo /not supplied)

·SERIAL CABLE (not supplied)

◆Be sure to connect the CONTROL CABLE corresponding with the terminal of your computer.

NOTE :

When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.

IBM-COMPATIBLE COMPUTERS (VGA / SVGA / XGA)

Desktop type Laptop type

Monitor

Audio Speaker

(stereo)

				Audio Amplifier
To the Monitor			To each terminal of your computer
	Monitor Output	Serial port	Serial port PS/2 port Audio Output	Audio Input

Terminal	Terminal
	Audio Cable
	(stereo / not supplied)
	Control Cable for PS/2 Port (supplied)
	Control Cable for Serial Port (supplied)

Serial Cable (not supplied / refer to P10.)

VGA Cable (supplied)

Monitor Cable (not supplied)

12