BASIC OPERATIONS

TURNING ON / OFF THE PROJECTOR

Turning on the Projector

1

Complete the peripheral connections (with Computer, VCR, and

etc.) before turning on the projector. (Refer to "CONNECTING TO

 

THE PROJECTOR" on Pages 10~15 for connecting those

 

equipment.

2

Connect the projector's AC power cord into a wall outlet. The

LAMP POWER indicator lights RED, and the READY indicator

 

lights GREEN.

3

Press the power ON-OFF button on the Remote Control Unit or on

the Top Control to ON. The LAMP POWER indicator dims, and

the Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts. The signal from the source appears after 30 seconds.

30

The Preparation Display disappears after 30 seconds.

Turning off the Projector

1

Press the power ON-OFF button on the Remote Control Unit or on

the Top Control, and the message "Power off?" appears on the

 

screen.

2

Press again the power ON-OFF button to turn off the projector.

The LAMP POWER indicator lights bright and the READY

 

indicator turns off. The Cooling Fans operate for one minute after

 

the projector is turned off. (During this "Cooling Down" period, this

 

appliance cannot be turned on.)

3

When the cooling the projector has finished, the READY indicator

turns to green again and you can turn the projector on. To power

down completely, disconnect the AC power cord.

Power off?

The message disappears after 4 seconds.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning the projector on again.

If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:

1.Press the power ON-OFF button to OFF.

2.Check the air filters for dust accumulation.

3.Remove dust with a vacuum cleaner. (See "AIR FILTER CARE AND CLEANING" section on page 34.)

4.Press the power ON-OFF button to ON.

If the TEMPERATURE WARNING indicator still continues to flash, call your authorized dealer or service station.

NOTE : The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan is working, TEMPERATURE WARNING INDICATOR flashes red.

21