VIDEO MODE

SELECTING VIDEO MODE

Direct Operation

Press the MODE button on the Top Control or the Remote Control Unit. The input source is selected among VIDEO or COMPUTER. The “Video” or “Computer” display will appear on the screen for a few seconds.

Menu Operation

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button.

Video

Computer

SELECTING COLOR SYSTEM

1

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select SYSTEM and

 

press the SELECT button. Another dialog box VIDEO SYSTEM

 

Menu will appear. (The display also appears by pressing the

 

SYSTEM button on the Top Control or the Remote Control Units.)

2

Press the POINT DOWN button and a red-arrow icon will appear.

 

Move the arrow to "Auto", and then press the SELECT button.

Auto

The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance.

When the Video System is PAL-M select the system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M

If the projector cannot reproduce the proper video image, it is required to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, or PAL-M.

This box indicates the system being selected.

30