Sanyo PLC-WXE45 Basic Operation How to Operate the On-ScreenMenu, Remote Control, MENU button

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1	Press the MENU button on the remote control to
	display the On-Screen Menu.
2	Use the Point ◄► buttons to select a Menu icon; use
	the Point ▲▼ buttons to select an item.
3	Press the SELECT button to show the item data. To

Remote Control	MENU button
	POINT buttons

SELECT button

adjust the data, use the Point ◄► buttons. Refer to the

relevant pages for more details about each adjustment.

To close the On-Screen Menu, press the MENU button again.

Note:

The selected item is not active until the SELECT button is pressed.

Press the SELECT button here to display previous items.

On-Screen Menu

Menu bar

Pointer (red frame) Press the Point ▲▼ buttons to move the pointer.

Item

SELECT

button

Menu icon

Pointer (red frame)

Press the SELECT button here to display next items.

Item data

Press the Point ◄► buttons to adjust the value.

Quit

Exit this menu.

20