Video Input
Input Source Selection (Component, RGB Scart
Direct Operation
Select Computer 1 by pressing the INPUT button on the top control or COMPUTER button on the remote control. Before using INPUT or COMPUTER button, select the correct input source through Menu operation as described below.
Top Control | INPUT button |
| |
| INPUT button |
Computer 1
Computer 2
Video
Remote Control
COMPUTER button
COMPUTER button
Computer 1
Computer 2
*
*
Menu Operation
1 | Use the MENU button to display the |
| Press the Point ◄► buttons to move the red frame |
| pointer to the Input Menu icon. |
2 | Use the Point ▲▼ buttons to move the red arrow |
| pointer to Computer 1 and then press the SELECT |
| button. |
3 | After the Source Select Menu appeared for Computer |
| 1, move the pointer to Component or RGB (Scart) and |
then press the SELECT button.
Component When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a
RGB (Scart) When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a
Note:
•Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out (p.44). •Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal.
•When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.44)
*See Note at the bottom of this page.
Input Menu | Input Menu icon | ||
|
|
| Move the pointer (red arrow) |
|
|
| to Computer 1 and press the |
|
|
| SELECT button. |
|
|
| |
|
|
|
|
| Computer |
| |
1 |
|
| |
|
|
| Source Select Menu |
|
|
| Move the pointer to Component |
|
|
| or RGB (Scart) and press the |
|
|
| SELECT button. |
35
