Video Input

Video System Selection

1

Press the MENU button to display the On-Screen

 

Menu. Use the Point ◄► buttons to move the red

 

frame pointer to the AV System Menu icon.

2

Use the Point ▲▼ buttons to move the red arrow

 

pointer to the desired system and then press the

SELECT button.

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

Component

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

Note:

The AV System Menu cannot be selected when selecting RGB (Scart).

AV System Menu (Video or S-video)

AV System Menu icon The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

AV System Menu (Component)

AV System Menu icon The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

36

Page 36
Image 36
Sanyo PLC-WXE46 Video Input Video System Selection, Video or S-video Auto, Component Auto, AV System Menu Video or S-video