Video Input

Input Source Selection (Video, S-video)

Direct Operation

Top Control

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 

Video

Wired

Remote Control

Menu Operation

1

Press the MENU button to display the On-Screen

Menu. Use the Point 7 8 buttons to move the red

 

frame pointer to the Input Menu icon.

Use the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu.

3

Move the pointer to the desired source and then press

the SELECT button.

 

When selecting Auto, the projector automatically

 

detects incoming video signal, and adjusts itself

 

to optimize its performance. The projector selects

 

connection in the following order:

 

1.

S-video

 

2.

Video

When video input signal is connected to the

VIDEO jack, select Video.

When video input signal is connected to the S- VIDEO jack, select S-video.

✔Notes:

• Wired and Wireless are for the Network function. See the owner’s manual “Network Set-up and Operation” .

• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).

Input Menu

VIDEO

VIDEO button

Input Menu icon

Move the pointer to

Video and press the

SELECT button.

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

0