Video Input

Sharpness

 

 

 

 

 

 

 

 

Press the Point 7 button to decrease the sharpness of the

 

 

 

 

image; press the Point 8 button to increase the sharpness

 

 

 

 

of the image (from 0 to 15).

 

 

 

 

 

 

Gamma

 

 

 

 

Use the Point 7 8 buttons to adjust the gamma value to

 

 

 

 

obtain a better balance of contrast (from 0 to 15).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Noise reduction

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Noise interference on the screen can be reduced. Select

 

 

 

 

one of the following options to get smoother images.

 

 

 

 

Off.......... Disabled.

 

 

 

 

L1........... Lower reduction

 

 

 

 

L2........... Higher reduction

 

 

 

 

 

 

Progressive

 

 

 

 

An interlaced video signal can be displayed in progressive

 

 

 

 

mode. Select one of the following options.

 

 

 

 

Off.......... Disabled.

 

 

 

 

L1........... For an active picture.

 

 

 

 

L2........... For a still picture.

 

 

 

 

Film........ For watching a film. With this function, the

 

 

 

 

 

 

projector reproduces pictures faithful to the

 

 

 

 

 

 

original film quality.

 

 

 

 

 

 

Reset

 

 

 

 

To reset the adjusted data, select Reset and press the

 

 

Image Mode Menu

SELECT button. A confirmation box appears and then select

 

 

 

 

[Yes]. All adjustments will return to their previous figures.

 

 

Move the red frame

 

 

 

 

 

 

pointer to an image

 

 

Store

 

 

item to be set and

 

 

 

 

 

 

 

then press the

 

 

 

 

 

 

SELECT button.

To store the adjusted data, select Store and press the

Store icon

SELECT button. Use the Point ed buttons to select one

 

 

 

 

from Image 1 to 4 and press the SELECT button.

 

 

 

 

A confirmation box appears and then select [Yes]. Stored

 

 

 

 

data can be called up by selecting an “Image (1–4)” in the

 

 

 

 

Image Select Menu on page 43.

 

 

 

 

 

 

Quit

 

 

 

 

 

 

 

 

 

A confirmation box

Exit the Image Adjust Menu.

 

 

 

appears and then

 

 

 

select [Yes].

 

 

 

 

 

 

 

✔Notes:

•Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.42).

•Reset and Store icons will be displayed when any adjustment is made.

45