Sanyo PLC-XD2600 owner manual Installation, Positioning the Projector, Adjustable Foot

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.

✔Note:

•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

•All measurements are approximate and may vary from the actual sizes.

A : B = 6 : 1			38.7'(11.80m)
		32.3'(9.84m)			(Inch Diagonal)
	21.5'(6.55m)			300"(wide)	300"(tele )
				Max. Zoom	Min. Zoom
	16.1'(4.90m)		200"
				250
10.7'(3.26m)
		150"
4.3'(1.30m)			167		A
	100"
		125
40"	83
					(Center)
					B

Screen Size
	40”	100”	150”	200”	300”
(W x H) mm
	813 x 610	2032 x 1524	3048 x 2286	4064 x 3048	6096 x 4572
4 : 3 aspect ratio
Zoom (max)	4.3'(1.30m)	10.7'(3.26m)	16.1'(4.90m)	21.5'(6.55m)	32.3'(9.84m)
Zoom (min)	5.1'(1.55m)	12.9'(3.92m)	19.4'(5.90m)	25.8(7.87m)	38.7'(11.80m)

Adjustable Foot

Projection angle can be adjusted up to 10.0 degrees with the adjustable foot.

Lift the front of the projector and push the foot lock latch on the projector.

Release the foot lock latch to lock the adjustable foot and rotate the adjustable foot to adjust the position and tilt.

To retract the adjustable foot, lift the front of the projector and push and undo the foot lock latch. Keystone distortion of the projected image can be corrected by menu operation.(see pages 23, 44-45)

Foot Lock Latch

Adjustable Foot

13