Compliance

Federal Communications Commission Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Model Number

: PLC-XD2200, PLC-XD2600

Trade Name

: Sanyo

Responsible party

: SANYO NORTH AMERICA CORPORATION

Address

: 21605 Plummer Street, Chatsworth, California 91311

Telephone No.

: (818)998-7322

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

GROUND

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.

If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET..

The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow Earth

Blue . . . . . Neutral Brown . . . . . Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED..

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE..

Page 7
Image 7
Sanyo PLC-XD2600 Compliance, AC Power Cord for the United States and Canada, AC Power Cord for the United Kingdom

PLC-XD2600 specifications

The Sanyo PLC-XD2600 is a high-performance multimedia projector that has gained popularity among educators, business professionals, and home theater enthusiasts alike. Combining advanced technology with user-friendly features, it delivers impressive visual quality and versatility.

One of the standout features of the PLC-XD2600 is its high brightness rating of 3,000 ANSI lumens, ensuring vibrant and vivid images even in well-lit environments. This makes it suitable for classrooms, conference rooms, and large venues where ambient light can be a challenge. The projector's native XGA resolution (1024 x 768) allows for clear and sharp image reproduction, making text and graphics easily readable.

Sanyo has incorporated an advanced liquid crystal display (LCD) technology in the PLC-XD2600, which contributes to its exceptional color accuracy and brightness. This technology ensures deeper blacks and brighter whites, enhancing the overall viewing experience. Furthermore, the projector supports a contrast ratio of 600:1, adding to the richness of images displayed.

Another significant characteristic of the PLC-XD2600 is its long lamp life. The projector uses a high-efficiency lamp designed to last up to 4,000 hours in normal mode and up to 5,000 hours in eco mode. This durability not only reduces the frequency of lamp replacements but also contributes to lower maintenance costs, making it an economical choice for long-term use.

Portability is a key aspect of the Sanyo PLC-XD2600, weighing only around 6.6 kg. Its compact design allows for easy transport between different locations, making it an ideal solution for traveling professionals. The projector is equipped with a variety of connectivity options, including VGA, composite, and S-Video inputs, offering flexibility to connect with various devices such as laptops, DVD players, and gaming consoles.

The user-friendly interface of the PLC-XD2600 enhances its accessibility, featuring an intuitive remote control and an easy-to-navigate menu system. This simplifies the setup process and allows users to adjust settings with ease.

In conclusion, the Sanyo PLC-XD2600 combines high brightness, excellent image quality, long lamp life, and portability, making it a reliable choice for diverse projection needs. Whether for educational purposes, professional presentations, or home entertainment, this projector stands out as a versatile option that delivers a compelling viewing experience.