Sanyo PLC-XP55L owner manual Preparation, Name of Each Part of Projector, HOT AIR Exhausted

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET

TOP CONTROLS

AND INDICATORS

PROJECTION LENS

				AIR INTAKE
				VENT
LENS COVER				INFRARED
	SPEAKERS		REMOTE RECEIVER
BACK OF CABINET	POWER CORD		TERMINALS	INFRARED
EXHAUST VENT	CONNECTOR	AND CONNECTORS		REMOTE RECEIVER

HOT AIR EXHAUSTED !

Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.

● Do not put a flammable object near this vent. ● Keep rear grills at least 3.3’(1 m) away from any object, especially heat-sensitive object.

● Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.

This projector detects internal temperature

and automatically controls operating power LAMP COVER of Cooling Fans.

CARRYING

HANDLE

When attached the PJ-Net organizer (optional part) to the projector, remove the these parts. Refer to the owner's manual in the optional PJ-Net organizer.

BOTTOM OF CABINET

AIR INTAKE VENTS

This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

●Do not cover vent slots.

● Keep side clear of any objects. Obstructions may block cooling air.

ADJUSTABLE FEET

AND

FEET LOCK LATCHES

7