PREPARATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees.
1 | Lift front of a projector and pull FEET LOCK LATCHES |
| on both sides of a projector. |
2 | Release FEET LOCK LATCHES to lock ADJUSTABLE |
| FEET and rotate ADJUSTABLE FEET to fine tune |
| position and tilt. |
3 | To shorten ADJUSTABLE FEET, lift front of a projector |
| and pull and undo FEET LOCK LATCHES. |
Position and keystone distortion of image can be adjusted using Menu Operation. (Refer to P 21 and 37.)
ADJUSTABLE FEET | FEET LOCK |
| LATCHES |
INSTALLING PROJECTOR IN PROPER POSITION
Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.
10˚
Do not tilt the projector more than 10 degrees above and below.
10˚
Do not point the projector up to project an image.
NO UPWARD
Do not point the projector down to project an image.
NO DOWNWARD
Do not put the projector on either side to project an image.
NO SIDEWAYS
10
