Sanyo PLC-XT25K, PLC-XT20L*, PLC-XT20K How to Operate the On-Screen Menu, Remote Control

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1	Press the MENU button on the top control or the
	remote control to display the On-Screen Menu.
2	Use the Point 78 buttons to select a Menu icon. Use
	the Point ed buttons to select an item to in the
	selected menu.
3	Press the SELECT button to show the item data. Use
	the Point 78 buttons to adjust the values.

To close the On-Screen Menu, press the MENU button again.

✔Note:

•The selected item is not active until the SELECT button is pressed.

Top Control

MENU button

POINT buttons

SELECT button

Remote Control

POINT buttons

SELECT button

MENU button

On-Screen Menu	Menu icon
Menu bar	Pointer
	(red frame )

Pointer (red frame )

Press the Point ed buttons to move the pointer.

Item

SELECT

button

Item data

Press the Point 78 buttons to adjust the value.

Quit

Exit this menu.

27