Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.
This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as shown in the figure below.
CAUTION
Make sure that the Fan control settings are set properly when setting up the projector with upward/downward inclination of over 20 degrees to the horizontal plane. Set the Fan control function in the Setting menu (see page 59).
Bottom | Front | Bottom | Front |
Downward | Upward | Upward | Downward |
(Usual) |
|
|
|
Positioning Precautions
Avoid positioning the projector as described below when installing.
10˚ | 10˚ |
|
10˚
10˚
Do not tilt the projector more than 10 degrees from side to side.
In upward projection, do not tilt the projector over 10 degrees right and left.
Do not put the projector on either side to project an image.
In downward projection, do not tilt the projector over
10 degrees right and left.
10˚
10˚
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this porjector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non- recommened ceiling mount kit or installation of the ceiling mount kit in an improper location.
7
