BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

 

before turning on the projector. (Refer to "CONNECTING

 

PROJECTOR" on page 11~13.)

2

Connect the projector's AC Power Cord into an AC outlet. The

 

LAMP Indicator lights red, and the READY Indicator lights green.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to the menu item "On start" on page

 

35.)

3

Press the POWER ON-OFF button on the Top Control or on the

Remote Control to ON. The LAMP Indicator dims, and the Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts.

26

The Preparation Display disappears after 30 seconds.

Lamp mode

4

The input source that was selected last and the Lamp mode

*Refer to page 35 for the Lamp mode.

status icon appear on the screen after the count-down. The

 

signal from PC or Video source appears after 30 seconds.

TURNING OFF PROJECTOR

1

Press the POWER ON-OFF button on the Top Control or on the

 

Remote Control, and a message "Power off?" appears on a

 

screen.

2

Press the POWER ON-OFF button again to turn off the

 

projector. The LAMP Indicator lights bright and the READY

 

Indicator turns off. After the projector is turned off, the Cooling

 

Fans operate (for 90 seconds).

3

When the projector has cooled down, the READY Indicator lights

 

green again.

NOTE : The Projector cannot be turned on during cooling period with the READY Indicator off. You can turn it on again after the READY Indicator lights green.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

DO NOT DISCONNECT AC POWER CORD BEFORE READY INDICATOR LIGHTS GREEN.

Power off?

The message disappears after 4 seconds.

note on operation

Do not use the projector for more than 24 hours continuously. Turn off the projector at least once in 24 hours and give it a rest. Continuous use may result in shortening the lamp lifetime.

When the “Power management” function is ON, the projector detects signal interruption and turns off the Projection lamp automatically. Refer to “Power management” on page 35.

When the WARNING TEMP. indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning on the projector again. (Refer to the section "WARNING TEMP. INDICATOR" on page 39.)

19