COMPUTER INPUT
MANUAL PC ADJUSTMENT
This projector can automatically tune the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which may not be turned by
The MANUAL PC ADJUSTMENT function allows you to manually adjust several parameters to match these special signal formats. Also, you can store these adjusted parameters in the 5 independent memory areas, enabling you to call up whenever you need.
1 | Press the MENU button and the |
| appear. Press the POINT LEFT/RIGHT button to move the red |
| frame pointer to the PC ADJUST Menu icon. |
2 | Press the POINT DOWN button to move the red frame pointer to |
the item that you want to adjust and then press the SELECT button. An adjustment dialog box will appear. Press the POINT LEFT/RIGHT button to adjust value.
Fine sync
Adjusts an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)
Total dots
The number of total dots in one horizontal period. Press the POINT LEFT/RIGHT button(s) and adjust number to match your PC image.
Horizontal
Adjusts horizontal picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position.
Vertical
Adjusts vertical picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position.
Current mode
Press the SELECT button to show the information of the computer selected.
Clamp
Adjusts clamp level. When the image has a dark bar(s), try this adjustment.
PC ADJUST MENU
PC ADJUST Menu icon
Move the red frame pointer to the item and press the SELECT button.
| Shows status | |
Selected Mode | (Stored / Free) of the | |
selected Mode. | ||
|
Press the POINT LEFT/RIGHT button to adjust the value.
Press the SELECT button at this icon to adjust “Clamp,” “Display area (H/V)” or set “Full screen.”
Current mode
Press the SELECT button at the Current mode icon to show the information of the computer connected.
24