Sanyo PLC-XU45 COMPUTER INPUT, SELECTING INPUT SOURCE, SELECTING COMPUTER SYSTEM

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Choose Computer by pressing the INPUT button on the Top Control or on the Remote Control.

If the projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

		MENU OPERATION
1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT button to move the red
	frame pointer to the INPUT Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
	Computer and then press the SELECT button. The Source
	Select Menu will appear.
3	Move the pointer to either RGB (Digital) or RGB (Analog) and
	then press the SELECT button.
		When digital signal is connected to DVI terminal,
RGB (Digital)
		select Digital.
		When analog signal is connected to DVI terminal,
RGB (Analog)
		select Analog.

INPUT button

Computer

Video

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Computer and press the SELECT button.

Computer

Source Select Menu

Move the pointer to RGB (Digital) or RGB (Analog) and press SELECT button.

SELECTING COMPUTER SYSTEM

This projector accepts various kinds of computer signals including VGA, SVGA, XGA, and SXGA. By selecting Computer input as a signal source, it automatically detects the signal format and tune itself to project a proper image without any additional settings. (Signal formats provided in this projector is shown on page 43.)

Note : The projector displays one of the Auto, ---, Mode 1/2/3/4/5, or the system provided in the projector.

Auto

– – –

When the projector cannot recognize a connected signal PC SYSTEM MENU as a PC system provided in this projector, the Auto PC

Adjustment function operates to adjust the projector and the message “Auto” is displayed on the SYSTEM Menu icon. (Refer to P23.) When the image is not provided properly, manual adjustment is required. (Refer to P24 and 25.)

There is no signal input from the connected computer. Make sure the connection of the computer and the projector is set correctly.

(Refer to TROUBLESHOOTING on page 40.)

SYSTEM Menu icon Displays system being selected.

SELECT COMPUTER SYSTEM MANUALLY

PC system can also be selected manually.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to move the red
	frame pointer to the PC SYSTEM Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
	the system that you want to set, and then press the SELECT

button.

PC SYSTEM MENU

SYSTEM Menu icon

Displays system being selected.

The systems on this dialog box can be selected.

Custom Mode (1~5) set in the

PC ADJUST Menu. (P24, 25)

22