Sanyo PLC-XU58 Computer Input, Input Source Selection, INPUT button Computer Computer Video

Computer Input

Input Source Selection

Direct Operation

Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Computer 1

Computer 2

Video

✳

Menu Operation

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 button to move the red frame
	pointer to the Input Menu icon.
2	Press the Point d button to move the red arrow pointer to
	either Computer 1 or Computer 2, and then press the
	SELECT button.
3	After the Source Select Menu appears for Computer 1,
	move the pointer to RGB and then press the SELECT button.
		When the input source is analog coming from a
RGB (Analog)
		computer through the DVI terminal, select RGB
		(Analog).
		When the input source is digital coming from a
RGB (PC Digital)
		computer through the DVI terminal, select RGB
		(PC Digital)
		When the input source compatible with HDCP
RGB (AV HDCP)
		is coming from video equipment through the
		DVI terminal, select RGB (AV HDCP).
		When the input source is analog coming from a
RGB
		computer through the COMPUTER IN
		2/COMPONENT IN/MONITOR OUT terminal,
		select RGB.

✔Note:

•Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/ MONITOR OUT terminal is set as Monitor out. (p44)

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

COMPUTER button

Computer 1

Computer 2 ✳

✳See Note on the bottom of this page.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 and press the SELECT button.

✳See Note on the bottom of this page.

Computer

1

Source Select Menu

Move the pointer to RGB(Analog), RGB (PC Digital), or RGB(AV HDCP) and press the SELECT button.

Input Menu

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to RGB and press the SELECT button.

Computer Input

27