Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.
| Auto PC Adj. | PC Adjust Menu |
|
| |
1 | Press the MENU button to display the |
|
| Press the Point 7 8 button to move the red frame pointer to |
|
| PC Adjust Menu icon. |
|
2 | Press the Point d button to move the red frame pointer to |
|
| Auto PC Adj. icon and then press the SELECT button twice. |
|
This Auto PC Adjustment can be also executed by pressing the Auto PC button on the remote control unit.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in the PC System Menu (p28). See “Store” on page 31.
PC Adjust Menu icon
Move the red frame pointer to the Auto PC Adj. icon and press the SELECT button.
✔Note:
•Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (p30, 31)
•The Auto PC Adj. cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu(p28), or when the signal is coming from
Computer Input
29
