Basic Operation

Turning Off the Projector

1 Press the POWER ON/STAND-BY button on the top control or on the remote control, and a message "Power off?" appears on the screen.

2

Press the POWER ON/STAND-BY button again

 

 

 

 

 

 

 

 

 

to turn off the projector. The POWER indicator

 

 

 

 

 

starts to blink red, and it continues while the

 

 

 

 

 

cooling fans are operating for about 90 seconds.

 

 

 

 

 

(You can select the level of fan quietness and

The message disappears after 4 seconds.

 

rotation speed. See page 50.)

 

 

 

 

 

At this time you can disconnect the AC power

 

 

 

 

 

cord even if the fans are still running.

 

 

 

 

3 When the projector has cooled down enough to be turned on again, the POWER indicator lights red.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

✔Note:

•When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet. (p.47)

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or emits a red light, see "Warning Indicator" on page 51.

•While the POWER indicator is blinking, lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator becomes red to be turned on again.

Operation Basic

19