Setting

Display

Press the Point 7 8 buttons to switch On/Off. This function decides to display On-Screen Displays.

On . . . . . . Show all the On-Screen Displays. Use this function when you want to project images after the lamp becomes bright enough. Factory default setting is this mode.

Countdown off . . Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.

Off . . . . . . Do not show On-Screen Displays, except;

●On-Screen Menu

●"Power off?" message

●P-Timer

●"No signal" message for Power management item (p.46)

●"Please wait..." message

●White arrows for True item in the Screen Menu (p.32)

Logo (Logo and Logo PIN code lock settings)

This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions.

 

 

 

✔ Note:

 

 

When On is selected in Logo PIN code lock

Logo select

function, Logo select and Capture functions

 

cannot be selected.

 

Logo select

 

This function decides the start-up display as follows:

 

User . .

the image you captured

 

Default .

the factory-set logo

 

Off . . . countdown only

 

42