Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
| Indicators |
|
| Projector Condition | |||
POWER |
| WARNING |
| LAMP |
| ||
|
| REPLACE |
|
| |||
red/green |
| red |
| yellow |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| The projector is off. (The AC power cord is unplugged.) | |
|
|
|
|
|
|
| |
|
|
|
|
|
| The projector is preparing for | |
|
|
|
| ✽ |
| lamp is being cooled down. The projector cannot be | |
|
|
|
|
|
| turned on until cooling is completed. | |
|
|
|
|
|
|
| |
|
|
|
|
|
| The projector is ready to be turned on with the POWER | |
|
|
|
| ✽ |
| ||
|
|
|
|
|
| remote control. |
|
|
|
|
|
|
|
| |
|
|
|
| ✽ |
| The projector is operating normally. | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
| ✽ |
| The projector is in the Power management mode. | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
| The temperature inside the projector is abnormally high. | |
|
|
|
|
|
| The projector cannot be turned on. When the projector | |
|
|
|
| ✽ |
| is cooled down enough and the temperature returns | |
|
|
|
|
| to normal, the POWER indicator lights red and the | ||
|
|
|
|
|
| projector can be turned on. (The WARNING indicator | |
|
|
|
|
|
| keeps blinking.) | Check and clean the air filters. |
|
|
|
|
|
| The projector has been cooled down enough and the | |
|
|
|
| ✽ |
| temperature returns to normal. When turning on the | |
|
|
|
|
| projector, the WARNING indicator stops blinking. Check | ||
|
|
|
|
|
| and clean the air filters. | |
|
|
|
|
|
| The projector detects an abnormal condition and cannot | |
|
|
|
|
|
| be turned on. Unplug the AC power cord and plug it | |
|
|
|
|
|
| again to turn on the projector. If the projector is turned | |
|
|
|
| ✽ |
| off again, disconnect the AC power cord and contact the | |
|
|
|
|
|
| dealer or the service center. Do not leave the projector | |
|
|
|
|
|
| on. It may cause an electric shock or fire hazard. | |
|
|
|
|
|
|
| |
• • • green |
| • • • red | • • • off | ||||
• • • blinks green |
| • • • blinks red |
| ||||
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 54 and 55.
60