Sanyo PLC-XW50A, PLC-XW55A How to Operate the On-Screen Menu, Top Control, Remote Control

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages regarding each adjustment and setting procedures.

1	Press the MENU button to display the On-Screen
	Menu.
2	Press the Point 7 8 buttons to select a Menu icon
	to adjust and press the Point ed buttons to select
	an item to adjust.
3	Press the SELECT button to show the item data.
	To adjust the data, press the Point 7 8 buttons.

Refer to the following pages for each adjustment.

To close the On-Screen Menu, press the MENU button again.

✔Note:

The selected item is not active until the SELECT button is pressed.

Top Control

SELECT button

MENU button

Remote Control

MENU button

POINT buttons

SELECT button

On-Screen Menu	Menu icon
Menu bar	Pointer
	(red framed )

Pointer (red framed )

Press the Point ed buttons to move the pointer.

Item

SELECT

button

Item data

Press the Point 7 8 buttons to adjust the value.

Quit

Exit this menu.

20