Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
| Indicators |
| Projector Condition |
POWER | WARNING | LAMP | |
REPLACE |
| ||
red/green | red | yellow |
|
|
|
| |
|
|
| The projector is off. (The AC power cord is unplugged.) |
|
|
|
|
|
|
| The projector is preparing for |
✽lamp is being cooled down. The projector cannot be turned on until cooling is completed.
| The projector is ready to be turned on with the POWER | |
✽ | ||
| remote control. |
|
|
| |
✽ | The projector is operating normally. | |
|
| |
|
| |
✽ | The projector is in the Power management mode. | |
|
| |
|
| |
| The temperature inside the projector is abnormally high. | |
| The projector cannot be turned on. When the projector | |
✽ | is cooled down enough and the temperature returns | |
to normal, the POWER indicator lights red and the | ||
| projector can be turned on. (The WARNING indicator | |
| keeps blinking.) | Check and clean the air filters. |
|
| |
| The projector has been cooled down enough and the | |
✽ | temperature returns to normal. When turning on the | |
projector, the WARNING indicator stops blinking. Check | ||
| and clean the air filters. | |
| The projector detects an abnormal condition and cannot | |
| be turned on. Unplug the AC power cord and plug it | |
✽ | again to turn on the projector. If the projector is turned | |
off again, disconnect the AC power cord and contact the | ||
| dealer or the service center. Do not leave the projector | |
| on. It may cause an electric shock or fire hazard. | |
|
|
|
• • • green | • • • red | • • • off |
• • • blinks green | • • • blinks red |
|
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 54 and 55.
60
