Setting

RC sensor

Select a location of the infrared remote receiver of the remote control. See “Remote Control Receivers and Operating Range” on page 15 for details.

All......... Activate all of the receivers.

Front & Top . Activate both the front and top receivers. Top & Back . .Activate both the top and back receivers. Front & Back Activate both the front and back receivers. Front.... Activate only the front receiver.

Top....... Activate only the top receiver.

Back..... Activate only the back receiver.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.

Select one of the following options:

Ready

When the lamp has been fully cooled

 

down, the POWER indicator changes

 

to green blinking. In this condition, the

 

projection lamp will be turned on if the

 

input signal is reconnected or any button

 

on the side control or remote control is

Shut down

pressed.

When the lamp has been fully cooled

Off

down, the power will be turned off.

Power management function is off.

Timer

If the input signal is interrupted and

 

no button is pressed for more than 30

 

seconds, the timer display with No signal

 

appears. It starts the countdown until the

 

lamp is turned off. Use the Point ▲▼

 

buttons to set the Timer (1~30 Min).

Note:

•Factory default is Ready: 5 Min.

•When the shutter is closed while the Power management function is working, the Power management function is released.

Standby mode

This function is available when operating the projector via network.

Network . .Supply the power to the network function even after turning off the projector. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.

Eco............... Select Eco when you do not use the projector

via network. The projector’s network function will stop when turning off the projector.

Refer to the owner’s manual of “Network Set-up and Operation”.

Power management

No signal

4 : 50

Timer left before Lamp is off.

Note:

•Factory default is Network.

•When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.

•When Eco is selected and the projector is in Stand-by, the communication of RS-232C serial port is not available.

59

Page 58 Page 60
Page 59
Image 59
Sanyo PLC-ZM5000L owner manual Power management, RC sensor, Shut down, Standby mode, Factory default is Network
Page 58 Page 60

PLC-ZM5000, PLC-ZM5000L specifications

The Sanyo PLC-ZM5000L and PLC-ZM5000 projectors are advanced models designed primarily for professional settings, including corporate presentations, educational environments, and high-end home theater setups. Both models are equipped with cutting-edge technologies that deliver exceptional image quality, brightness, and versatility.

One of the standout features of the Sanyo PLC-ZM5000L and PLC-ZM5000 is their high brightness output. With a luminosity rated at up to 5000 ANSI lumens, these projectors ensure clear and vibrant images even in well-lit rooms. This makes them ideal for large venues or spaces where ambient light poses a challenge. The projectors also utilize a high-resolution LCD panel that enhances color reproduction and sharpness, providing users with stunning visuals.

Another significant characteristic of these projectors is their flexible installation options. They feature a wide zoom range and extensive lens shift capabilities, which allow users to position the projector almost anywhere in the room without compromising image quality. This flexibility makes it easier to integrate the projectors into various environments, from conference rooms to auditoriums.

The PLC-ZM5000L and PLC-ZM5000 also incorporate advanced connectivity options. With multiple inputs available, including HDMI, VGA, and component video, users have the versatility to connect a variety of devices, from laptops and desktop computers to DVD players and Blu-ray systems. Additionally, some models support wireless connectivity, making it convenient to project content from personal devices without the clutter of wires.

These projectors also prioritize ease of use and maintenance. They come equipped with features such as an automatic vertical keystone correction, which helps adjust the image shape when the projector is not perfectly aligned with the screen. This ensures that presentations are professional-looking and free from distortion.

Furthermore, the Sanyo PLC-ZM5000L and PLC-ZM5000 boast a long lifespan for their lamp, reducing the frequency of replacements and minimizing downtime. The projectors are designed with energy-saving technologies that extend lamp life, contributing to lower operational costs.

Overall, the Sanyo PLC-ZM5000L and PLC-ZM5000 projectors stand out in the market for their high brightness, image quality, versatile installation options, comprehensive connectivity, and user-friendly features. These projectors are well-suited for professionals seeking reliable and high-performance solutions for their visual presentation needs.
Top Page Image Contents