Appendix

The shutter does not

– Check "Protection" or "Release key" of the Shutter function. (See p.63)

work..

 

–Power management function runs by initial setting. Check “Setting” section on page 59.

–When the filter cartridge replacement icon keeps appearing on the screen at turning on the projector for some time and no action is taken to replace

The power is turned off

the filter cartridge, the projector will be automatically shut down in 3

automatically..

minutes after turning on to protect the projector. (See pages 66, 81)

–Do not cover the ventilation slots on the projector. (See pages 4, 6)

–Projector may be used in high ambient temperature environment. Make sure the temperature is not out of Operating Temperature (41˚F–104˚F [5˚C–40˚C]). (See page 72)

You cannot operate

– If the side control is locked at "Key lock" under "Security" of Setting menu,

the side control is not available. Please check “Setting” section on page

with the side control..

61.

 

 

– Check the batteries.

 

– Check if the RC sensor is set properly. (See page 59)

 

– Make sure no obstruction is between the projector and remote control.

 

– Make sure you are not too far from the projector when using the remote

 

control.Maximum operating range is 16.4’ (5m). (See page 15)

The Remote Control

– Make sure that the remote control code conforms to the projector’s code.

(See “SETTING” section on page 58.)

does not work..

– Unlock the Key lock function for the remote control. (See page 61)

 

 

– Wireless remote control does not work when the remote control cable is

 

connected to the projector. (See page 15)

 

– Check if the ON/OFF switch on the remote control is set to “ON.”

 

– Make sure that the simple mode in the remote control function is set to Off

 

(See page 58).

Wireless mouse

– Check the cable connection between the projector and your computer.

(See pages 19, 32)

function does not

– Check the mouse setting on your computer.

work..

– Turn on the projector before you turn on the computer.

 

Indicators blink or

– Check the status of the projector with referring to “Indicators and projector

light..

condition” on pages 79-81.

appears on the screen

– Your operation is invalid. Operate correctly.

 

Unable to unlock the

 

Logo PIN code lock,

– Contact the dealer where you've purchased the projector or the service

Security key lock or

center.

Security PIN code lock..

 

Forget the Logo PIN

– Contact the dealer where you've purchased the projector or the service

code or Security PIN

center.

code..

 

 

– The projector detects an abnormal condition. Unplug the AC power cord and

appears on the screen

contact the dealer where you purchased the projector or the service center.

 

WARNING:

High voltages are used to operate this projector.. Do not attempt to open the cabinet..

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

75

Page 74 Page 76
Page 75
Image 75
Sanyo PLC-ZM5000L Shutter does not, You cannot operate, Does not work, Wireless mouse, Indicators blink or, Light, Code
Page 74 Page 76

PLC-ZM5000, PLC-ZM5000L specifications

The Sanyo PLC-ZM5000L and PLC-ZM5000 projectors are advanced models designed primarily for professional settings, including corporate presentations, educational environments, and high-end home theater setups. Both models are equipped with cutting-edge technologies that deliver exceptional image quality, brightness, and versatility.

One of the standout features of the Sanyo PLC-ZM5000L and PLC-ZM5000 is their high brightness output. With a luminosity rated at up to 5000 ANSI lumens, these projectors ensure clear and vibrant images even in well-lit rooms. This makes them ideal for large venues or spaces where ambient light poses a challenge. The projectors also utilize a high-resolution LCD panel that enhances color reproduction and sharpness, providing users with stunning visuals.

Another significant characteristic of these projectors is their flexible installation options. They feature a wide zoom range and extensive lens shift capabilities, which allow users to position the projector almost anywhere in the room without compromising image quality. This flexibility makes it easier to integrate the projectors into various environments, from conference rooms to auditoriums.

The PLC-ZM5000L and PLC-ZM5000 also incorporate advanced connectivity options. With multiple inputs available, including HDMI, VGA, and component video, users have the versatility to connect a variety of devices, from laptops and desktop computers to DVD players and Blu-ray systems. Additionally, some models support wireless connectivity, making it convenient to project content from personal devices without the clutter of wires.

These projectors also prioritize ease of use and maintenance. They come equipped with features such as an automatic vertical keystone correction, which helps adjust the image shape when the projector is not perfectly aligned with the screen. This ensures that presentations are professional-looking and free from distortion.

Furthermore, the Sanyo PLC-ZM5000L and PLC-ZM5000 boast a long lifespan for their lamp, reducing the frequency of replacements and minimizing downtime. The projectors are designed with energy-saving technologies that extend lamp life, contributing to lower operational costs.

Overall, the Sanyo PLC-ZM5000L and PLC-ZM5000 projectors stand out in the market for their high brightness, image quality, versatile installation options, comprehensive connectivity, and user-friendly features. These projectors are well-suited for professionals seeking reliable and high-performance solutions for their visual presentation needs.
Top Page Image Contents