Sanyo PLCSW20AR TOP Controls and Indicators, Used to turn the projector on or off. P19

BEFORE OPERATION

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.

LAMP INDICATOR

POWER ON–OFF BUTTON

Used to turn the projector on or off. (P19)

INPUT BUTTON

Used to select input source. (P22, 30)

MENU BUTTON

Used to open or close MENU operation. (P17, 18)

IMAGE BUTTON

Used to select image level. (P27, 32)

ON – OFF

INPUT

MENU

-VOLUME-

IMAGE

SELECT

LAMP

READY

WARNING

TEMP .

LAMP

REPLACE

Becomes dim when the projector is turned on. And it is bright when the projector is in stand-by mode.

READY INDICATOR

Lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (P36)

WARNING TEMP. INDICATOR

Flashes red when

internal projector temperature is too high. (P39)

LAMP REPLACE INDICATOR

Turns yellow when the life of the projection lamp draws to an end. (P37)

SELECT BUTTON

Used to execute the item selected. It is also used to expand / compress the image in DIGITAL ZOOM mode. (P29)

POINT (VOLUME + / – ) BUTTONS

Used to select an item or adjust value in ON-SCREEN MENU. They are also used to pan the image in DIGITAL ZOOM +/– mode. (P29)

POINT LEFT/RIGHT buttons are also used as VOLUME +/– buttons.

16