HOW TO MAKE COFFEE
1Add coffee beans to grinder case.
➀Measure coffee beans with the measuring spoon that is provided as an accessory. (see chart)
➁Close the grinder cover.
➁
➀
The inside of grinder and grinder cover should be completely dry, or coffee grains will stick.
*Do not run the grinder when empty or filled with more than 6 measuring spoons of coffee beans. Doing so may damage the motor.
Suggested Coffee Bean Measurements
NO. OF CUPS OF | MEASURING |
HOT/ICE COFFEE | SPOON |
6 cups | 6 |
5 cups | 5 |
4 cups | 4 |
3 cups | 3 |
2 cups | 2 |
1 cup | 1 + 2/5 |
Measuring Spoon Guide
4/5 (Top Line)
2/5 (Middle Line)
1/5 (Bottom Line)
2Set switch to "Off/Grind" position and plug in.
Keep Warm
Grind
*If switch is set to the "On/Keep Warm" position, the grinder will not function, but the "Keep Warm" plate will heat up. Do not touch the plate to avoid injury.
3Press Grind button to grind coffee beans.
➀While pressing grinder cover, press Grind button for 10 seconds. (It generally takes 10 seconds for medium ground coffee. Use a shorter grind time for coarser ground.)
➁Remove grinder case from main unit and tap the lid lightly so that coffee grounds will settle in the case and prevent any spillage when the lid is opened.
*Do not press Grind button for more than 15 seconds. Doing so may grind the beans too fine and may clog paper filters, which may cause hot water to overflow from coffee basket.
*Cutter blades may still be spinning for few seconds after the Grind button is pressed. Always make certain that the cutter blades come to a complete stop prior to removing the grinder case from the main body.
Make sure the tank lid is closed while grinding. Coffee grounds or beans may fall in the tank and may cause malfunction.
Press
6
