Sanyo SAC-MST6 Care and Maintenance, General Cleaning Instructions, Special Cleaning Instructions

CARE AND MAINTENANCE

GENERAL CLEANING INSTRUCTIONS

●Always unplug and let the entire unit cool off prior to cleaning.

●Use a mild dishwashing soap and soft sponge or cloth.

●Do not use scouring powder or scrubbing brush.

●Do not put any parts in dishwasher. Doing so may cause the parts to deform.

●Do not use boiling water. Doing so may cause parts to deform or crack.

ITEMS YOU CANNOT WASH:

●Main unit and Keep Warm plate

-Wipe the unit with a damp sponge or dishcloth that has a small amount of mild dishwashing soap. Then wipe it with a dry dishcloth.

●Grinder lid and grinder case

-Remove coffee grounds with brush that is included and then wipe with a damp dishcloth.

*To avoid injury, do not touch cutter blades.

*Warning! Do not soak the unit in water or splash it with water. Doing so may cause the unit to short circuit or cause electric shock.

ITEMS YOU CAN WASH:

●Glass Carafe

-Wash with a soft sponge and rinse well with water. Do not use scouring powder, scouring pad, or steel wool. Scratches in the glass may cause cracking.

●Tank, Tank Lid, Basket Lid, Coffee Basket, Tea Basket

-Wash well with a soft sponge and rinse with water thoroughly.

●Charcoal Filter

-Run water through the filter after each use to prevent filter from clogging. Do not use soaps, bleach, or brushes.

-The color of the filter may change. This is not a malfunction.

SPECIAL CLEANING INSTRUCTIONS

Your coffee maker will need an occasional, special cleaning to remove mineral buildup left by water. Follow the instruction below.

1.Remove charcoal filter. (This is to prevent the vinegar from adhering to filter).

2.Place carafe, coffee basket, with basket lid, on Keep Warm plate.

3.Attach water tank to main body and add water to "Cups 2" line. Add 1.69 ounces vinegar, and stir well.

4.Set switch to the "On" position and allow the solution to drip until one cupful is obtained. Set the switch to the "Off" position and wait approximately 10 minutes to allow the solution to settle.

5.After waiting 10 minutes, set the switch to the "On" position and allow the remaining solution to drip. Once all the solution has dripped out, wait for at least 5 minutes, pull out the carafe and discard the solution.

Turn the unit off.

6.Rinse the water tank and set the carafe in place. Pour cold tap water into the tank to "Cups 6" line. Turn unit on and allow the water to drip.

Perform this procedure at least twice.

Repeat until the smell of vinegar disappears.

11