![PRODUCT MAINTENANCE](/images/new-backgrounds/34201/3420119x1.webp)
PRODUCT MAINTENANCE
Caution: Be sure to turn the ON/OFF switch to the ""position and disconnect the power cord from the wall outlet before cleaning.
MAIN UNIT
1 Wet a soft cloth with neutral detergent solution and wring out excess liquid.
2 Wipe the external surfaces 3Wipe with a dry cloth. of the unit.
NEUTRAL
DETERGENT
Caution: Do not use organic solvents, including thinner, or other strong cleaning liquids such as alkaline detergents. Use of such substances may cause discoloration or deterioration of materials resulting in deformation or cracking.
CLEANING THE AGITATOR ASSEMBLY
When threads get caught in the agitator assembly, clean the assembly.
Remove threads caught in the agitor assembly by cutting them with scissors.
Threads
ELECTROSTATIC MICRON FILTER
Agitator assembly
The electrostatic micron filter should be replaced at least once every 8 months in order to maintain cleaning performance. Only use genuine Sanyo replacement filters.
Remove the dust cover and replace | 2 | Replace the dust cover. |
1 the electrostatic micron filter. |
| |
Electrostatic micron filter |
|
|
Dust cover
Caution: The electrostatic micron filter cannot be reused.
9