USING THE VACUUM CLENER
UPHOLSTERY TOOL & DUSTING BRUSH(SC-180 only)
Press the tabs downward to remove the dusting brush from the upholstery tool.
Insert the front portion of the dusting brush into the groove located |
|
inside the front of the upholstery tool. | Tabs |
|
Pull up on the tabs to reattach the dusting brush to the upholstery tool.
After use, fix to the extension pipe for storage as shown in the illustration.
TURBINE BRUSH (SC-180 only)
The turbine brush has a lever with two positions.
R U G | FLOOR |
Lever
RUG FLOOR
Caution:
This rug attachment has a small,
Turbine
Brush
Do not touch the agitator while it is spinning.
Do not vacuum bare floors with lever in "rug" position. Doing so may damage the floor. Do not leave the brush rotating for long periods over the same spot. Doing so may damage the carpet.
7