DUST DISPOSAL /
If there is a reduction in suction power, turn off the vacuum cleaner, disconnect the hose and proceed as follows:
1. To separate the dust compartment from the vacuum cleaner, push the clamp button as shown.
Dust compartment
2. To remove the filter.
Caution:
Remove the filter slowly
to prevent the dust from falling out.
3. Removing the dirt. Caution:
If the dust is packed tightly and difficult to remove, lightly tap the dust compartment.
4. Slide the lever in the direction of the arrows to remove the dust by shaking.
5.Hold the clamp to open up the
Clamp
Filter
6. To reassemble the unit. Insert the filter in the dust compartment. Then attach the dust compartment section
to the motor section.
Clamp button
Lever