CARE OF TURBO CLEANTM /
Before caring for the TURBO CLEANTM , be sure to turn OFF the switch of the unit and disconnect the plug from the outlet.
If needles, pins or waste paper get stuck in the suction inlet, remove them after going through the above procedure.
Trying to remove them during operation is dangerous.
EDGE GRABBERTM /
The Edge Grabber system is designed to help clean all the way up to the baseboards. The suction shutter is opened when the floor nozzle is pushed against the wall.
Edge grabber
CARE AND MAINTENANCE
If you have a problem with your vacuum cleaner, consult the handy guide below. If the vacuum cleaner is malfunctioning, do not operate it. Contact your dealer or the nearest Sanyo Service Center.
E/ARA