Sanyo SCP-2700 Connections Continued Optional, Preferred TV Connections Continued, Preparation

Connections (Continued)

Optional, Preferred TV Connections (Continued)

Rear of DVD+VCR

Note

You can ONLY listen to DVD playback using COAXIAL

(X)and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jacks. (See page 12.)

Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1, A2) supplied.

A1A2

PREPARATION

X

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1	Connect one of the DVD+VCR’s DIGITAL AUDIO
	OUT jacks (COAXIAL X) to the corresponding in

jack on your amplifier. Use an optional digital (coaxial X) audio cable.

2 You will need to activate the DVD+VCR’s digital output. (See “AUDIO” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD+VCR (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Notes

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

–Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

–To see the audio format of the current DVD in the on-screen display, press AUDIO.

L	R	COAXIAL
AUDIO INPUT		DIGITAL INPUT

Amplifier (Receiver)

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or AV INPUT jacks on the DVD+VCR to the audio/video out jacks on your accessory component, using the optional audio/video cables.

Accessory Component:

VCR, Camcorder,

Video Camera,

Satellite Receiver,

Laser Disc Player

Jack panel of Accessory

AUDIO

OUTPUT

R

L

VIDEO

OUTPUT

OR

Rear of DVD+VCR Front of DVD+VCR

13